ANGLE HOSE VALVE
Angle pattern brass hose valves, with threaded connections, intended to control the flow of the water from the main risers in standpipe systems. Turning the handle counter clockwise the hose valve opens, allowing the water to flow out from the valve; turning the handle clockwise, the valve shuts off. Hose valves are used with a Fire Hose Rack Assembly, or as Fire Department outlet connections Model: FGAV105 -1.5” & 2.5”
AUTOMATIC CONTROL VALVES
CLA-VAL has been a leading manufacturer of automatic control valves, serving waterworks, fire protection, aviation fuelling and industrial customers throughout the world. Main relief valve is designed to relieve excess pressure in a fire protection system, while eliminating the damaging effects of cavitation. The valve features an adjustable pressure setting, fast opening to maintain steady line pressure, and gradual closing for surge free operation. Casing relief valve is designed to relieve excess pressure in a fire protection system, while eliminating the damaging effects of cavitation. The valve features an adjustable pressure setting, fast opening to maintain steady line pressure, and gradual closing for surge free operation. is typically used in a fire protection system to trim water pressure, thus preventing pressure build-up whenever line pressure exceeds the setting of the spring. It will relieve excess pressure to atmosphere to prevent damage to the distribution network
PRESSURE REDUCING ANGLE VALVE
Pressure reducing device angle valve 3001b. Rated adjustable restrictions of residual pressure up to 3001b. Locking pin device restricts full opening of valve removed by firefighters to allow full opening of valve female x male. Standard Equipment: Female NPT inlet x male hose thread outlet forged brass valve Red hand wheel.
- Model: FGPRV115 -1.5”
- Model: FGPRV125- 2.5”
AUTOMATIC QUICK RESPONSE SUPPRESSION SYSTEM (AQRS)
Electrical mains, server racks, MCB, wiring tray, automobile engine & industrial machinery have one thing in common. These spaces are high-risk spaces because they are most vulnerable to fire. What’s more, these spaces hide fires until it becomes too large to handle. The In-Panel Tube-Based System (AQRS) is an innovative firefighting solution that is ideal for enclosed electrical cabinets that are highly vulnerable to fire. Application:
- Electrical Panels
- Electrical Cabinets
- Switching Areas
- Printing Press
- Server Racks
- Mobile Tower
- Diagnostic Machines
- Ups Rooms
AUTOMATIC SPRINKLERS UPRIGHT & PENDENT
The FA003U/FA004U Standard/Quick Response Upright and FA005P/FA006P Standard/Quick Response Pendent Sprinklers (Ref. Figure A) are automatic sprinklers of the frangible bulb type. They are “standard/quick response – standard orifice spray sprinkler” intended for use in fire sprinkler systems designed in accordance with the standard installation rules recognized by the applicable Listing or Approval agency (e.g., UL Listing is based on NFPA 13 requirements). The Upright, Pendent Sprinklers all produce a hemispherical water distribution pattern below the deflector. Old Models:
- FA003U Standard Response Upright Sprinkler
- FA004U Quick Response Upright Sprinkler
- FA005P Standard Response Pendent Sprinkler
- FA006P Quick Response Pendent Sprinkler
- FA013 Standard Response Upright Sprinkler
- FA014 Quick Response Upright Sprinkler
- FA015 Standard Response Pendent Sprinkler
- FA016 Quick Response Pendent Sprinkler
HORIZONTAL SIDEWALL SPRINKLERS
Horizontal sidewall sprinklers are generally used in lieu pendent and upright sprinklers because of the building construction or installation economy considerations. They are designed for installation along a wall or the side of a beam and just beneath a smooth ceiling. Installed with their centreline of waterway horizontal, these sprinklers produce a quater-spherical water discharge patter that is predominately directed; however, a portion of the spray is also directed toward the back wall. Model FA001/FA002H, Standard/Quick Response Horizontal Sidewall Sprinklers, are automatic Sprinklers of the frangible bulb type and standard spray, 1/2” orifice, 5/3 mm bulb. They are standard/quick response - standard orifice sidewall sprinklers” intended for use in fire sprinkler systems designed in accordance with the standard installation rules recognized by the applicable Listing or approval agency (e.g., UL Listing is based on NFPA 13 requirements). Old Model:
- FA001H Standard Response Sprinkler
- FA002H Quick Response Sprinkler
- FA011 Standard Response Sprinkler
- FA012 Quick Response Sprinkler
BEAM DETECTOR FG-BD100
The FG-BD100 is a high-performance reflective infrared beam detector designed for protecting large open spaces such as warehouses, atriums, sports halls, and industrial facilities. Operating on the principle of infrared beam obscuration via a single reflective mirror, it alerts the fire alarm panel when smoke interrupts the beam path — covering distances from 8 to 100 metres in a single-ended, easy-to-install configuration.
Effortless Alignment What sets the FG-BD100 apart is its exceptionally user-friendly commissioning process. A built-in laser beam pointer identifies the exact mirror mounting location, while a Nixie tube digital display guide shows real-time light intensity between the detector and mirror — making precise alignment straightforward even in large, complex spaces.
Flexible Range & Sensitivity Four selectable beam pathway spans (8–20m, 20–40m, 40–70m, and 70–100m) are configurable via encoder, alongside three adjustable sensitivity settings (2.6 dB, 3.8 dB, and 5.8 dB) to suit different environmental conditions. Automatic compensation continuously corrects for dust contamination, positional drift, and transmitter ageing — maintaining consistent detection performance throughout the product's life.
Key Specifications
- Operating Voltage: 20–28 VDC
- Current: Standby 23 mA / Commission 56 mA / Alarm 33 mA
- Detection Range: 8–100m (4 selectable spans)
- Sensitivity: 2.6 dB, 3.8 dB, 5.8 dB (selectable)
- Reset Time: Under 2 seconds
- Relay Output: Normally open & closed / 2.0A at 30 VDC
- Operating Temperature: -10°C to +50°C
- Humidity: 0–95% RH
- Ingress Protection: IP30 (IP66 with glue seal for permanent fixing)
- Dimensions: 190.87 × 126.87 × 91.96 mm | Weight: 440g
Certifications: LPCB Approved | EN54-12 Compliant | BS 5839 Part 1:2002
BRANCH PIPES LEVER OPERATED
Fireguard branchpipe's are lever operated fire nozzles manufactured light alloy to achieve a robust, durable fire branch that remains extremely light and manoeuvrable for ease of use. The selection between Jet and Spray and On / Off modes is easily achieved by adjusting the lever arm accordingly. This simple to use system allows for complete control by the operator to adjust his water flow to suit the individual application required.
- Model: FG07-131C-00
- Model: FG07-131A-00
- Model: FG07-131B-00
BULKHEAD EMERGENCY LIGHT
Specification
- Model: FG-T603L
- Voltage 85-265VAC 50/60Hz
- AC Power 2W Battery Ni-MH - SC 4.8V / 2200MAH
- Emergency Duration> 3Hours
- LED 20 pcs SMD2835
- Lumen >250LM Color White
BULKHEAD EMERGENCY LIGHT
Specification
- Model: FG-T605L
- Voltage 85-265VAC 50/60Hz
- AC Power 2W Battery Ni-MH - SC 4.8V / 2200MAH
- Emergency Duration > 3Hours
- LED 1 pc SMD 3W Lumen >310LM
- Color White
