Addressable module with integrated isolator in micro format FG901MMI_AP/ FG901MMO_AP /FG901MMIOS_AP
The FG901MM series are ultra-compact addressable input/output micro-modules designed to interface a wide range of auxiliary devices — including sirens, entrance panels, and electromagnets — directly onto a fire detection loop. Despite their miniature footprint, each module incorporates a built-in short-circuit isolator, ensuring loop communication remains uninterrupted even in the event of a device or wiring fault.
Three Models for Every Application
- FG901MMI_AP — Addressed input micro-module (1 supervised input, 1 address)
- FG901MMO_AP — Addressed output micro-module (1 output, 1 address)
- FG901MMIOS_AP — Combined input and output micro-module (1 input + 1 output, 2 addresses)
Effortless Installation At just 42×27×15mm and 30g, these modules fit virtually anywhere. Addressing is done via programmer or auto addressing through the control panel — no DIP or rotary switches needed. Auto addressing supports "T" connection topologies, and an auto mapping function speeds up commissioning further.
Key Specifications
- Supply Voltage: 27V
- Standby Current: 130 µA | LED Current: 6 mA
- Operating Temperature: -5°C to +40°C
- Humidity: Up to 95% RH (non-condensing)
- Loop Capacity: Up to 240 addresses over 2km cable
- Dimensions: 42 × 27 × 15 mm | Weight: 30g
- Three-colour LED (red/green/yellow) panel-controlled
- Construction: Matt white ABS, cable up to 2.5mm²
Certifications: Applus Certified (n°1922-CPR-1116) | EN54-17 & EN54-18 Compliant
ATMOSPHERIC FOAM CONCENTRATE STORAGE TANK
The atmospheric foam concentrate storage tank is manufactured in stainless steel material. The tank is provided with an expansion dome with a volume not less than 2% of the total capacity of the tank. All the tanks must be kept filled upto the level of half way of expansion dome. A sediment sump is provided at the bottom of the concentrate tank. The tank is provided with an inlet, an outlet, a drain connection and a fill connection. The horizontal tanks are supported by two saddles/legs welded to the tank and drilled for anchoring. Tank is provided with lifting lugs, designed to lift empty tanks. The tank has flat ends but can be provided with dished ends if needed. Atmospheric foam concentrate storage tank is used with Inline Foam Inductor and Inline Balance Pressure Foam Proportioning system. Refer to data-sheets/ product catalogues of these devices for equipment operational and installation guidelines.
BUTTERFLY VALVE GROOVED END & WAFER TYPE 300PSI
The Grooved End & Wafer type Butterfly valves are indicating type designed for use in fire protection systems where a visual indication is required as to whether the valve is open or closed. They are used, for example, as system, sectional, and pump water control valves. They have cut groove inlet and outlet connections that are suitable for use with grooved end pipe couplings that are listed and approved for fire protection systems. For applications requiring supervision of the open position of the valve, the Gear Operators for the Model BO-G Butterfly Valves are provided with two sets of factory-installed internal switches each having SPDT contacts. The supervisory switches transfer their electrical contacts when there is movement from the valves normal open position during the first two revolutions of the hand wheel.
EYEWASH WALL MOUNTED
Each spray head has an internal flow control and filter to remove impurities. Operated by a push plate, stay-open ball valve. The eyewash is self-chaining. Delivered with collecting bowl in powder-coated stainless steel, brass valve and wall bracket in aluminium. The water supply should be designed for a minimal flow of 14 I/min at a pressure of 2,4 bar. Mount the unit approx. 1100 mm from the floor and up to the top of the eye wash spray head.
EYEWASH WITH BOWL, FREEZE RESISTANT
Krusman eye/face wash for outdoor use with galvanised steel pipes and a green/white stripe. Self-draining eye/facewash with built-in flow control and filter for each individual spray head. Stay-open ball valve, operated by a pull handle. Designed for a minimum flow of 28 l/min at 2.4bar pressure. Freeze-resistant and manufactured for Ex-classified environments. The model is available for ex-classified or non-ex-classified environments. Emergency signs are enclosed with each eyewash.
EYEWASH, FLOOR MOUNTED
Each spray head has an internal flow control and filter to remove impurities. Operated by a push plate, stay-open ball valve. The eye/facewash is self-draining. Delivered with collecting bowl in powder-coated stainless steel, pipes in galvanised steel with green/ white stripes, and a brass valve. The water supply should be designed for a minimal flow of 14 1/min at a pressure of 2,4 bar.
FGT50 Bronze Gate Valve — Fire Protection Service (OS&Y, Rising Stem)
The FGT50 is a UL Listed fire protection grade bronze gate valve designed for the isolation of clean water and non-corrosive fluids. Ideal for building services, water treatment, fire suppression systems, and general industrial water isolation, it delivers consistent and dependable shutoff performance where reliability is critical. Features
- Compact structure with reliable sealing
- Non-rising stem to minimise installation height in confined spaces
- Threaded bonnet construction with graphite gland packing
- Low pressure drop for minimal flow restriction when fully open
- Available in ANSI B1.20.1 NPT and BS21 BSPT thread connections
- Certification: UL Listed
- Body Material: Bronze ASTM C83600
- Stem: Brass | Handwheel: Cast Iron
- Medium: Water (clean, non-corrosive)
- Connection Standard: ANSI B1.20.1 NPT / BS21 BSPT
- Available Sizes: ¾" · 1" · 1¼" · 1½" · 2"
- Working Pressure: 175 PSI (CWP)
- Seat & Shell Test Pressure: 350 PSI / 80 PSI Air
FIRE HOSE - DURA-LINE TYPE 3
Fireguard produces various types firefighting hoses with high quality for most demanding situations. All hoses are manufactured according to national fire protection association (NFPA)1961 latest edition. The Fireguard Model Dura-line FGH303N synthetic fire hose is widely used by firefighters worldwide. This hose features: is tough durable and abrasion resistant, supplied with different couplings. The Nitrile rubber cover makes rot proof and easy to clean. Construction-polyester reinforcement with Nitrile rubber cover and inner liner Nitrile rubber.
Gas Weight Monitoring System Analog type with Normal Indication (Standalone)
Online Monitor is used in Gas based fire extinguisher system like Co2 to provide alert indication to check refill as per bureau of Indian standards requirement. Normal condition will be indicated by green LED (Flashing). Alert will be indicated by yellow LED. IH007-ST online monitor analog type is stand alone model this is specially designed to use monitor one cylinder only. Input will be 24V DC and Output will be potential free ‘NO’ contact.
Gas weight Monitoring System Mechanical Indicator Type
Online Monitor is used in gas based fire extinguishing system like Co2 gas to provide alert indication to check refill is required to meet NPFA/BSI requirement. Movement of indicator in downward refill status. Please note that this device is not a weighing unit. This only provide alert indication to check the cylinder and do refill as per requirement.
Gas Weight Monitoring System Mechanical Indicator Type With Explosion Proof Limit Switch
Online Monitor is used in Co2 Gas based fire extinguisher system to provide refill alert indication in case of loss of agent as per design standards. Movement of indicator in downward position indicates alerts status. Ex. Proof limit switch can be additionally used to provide further signal at control panel.
Indicator Post Underground Type FGVI322
FIREGUARD FGVI322 Underground Indicator Post
The FIREGUARD FGVI322 is an FM Approved underground-type indicator post designed for reliable valve position monitoring in fire protection systems. Built to AWWA C550 standards with a fusion-bonded coating, it delivers long-term corrosion resistance in demanding underground environments.
Featuring clear "OPEN" and "SHUT" target indicators visible through a stabilized Lexan window, the FGVI322 allows instant valve status confirmation at a glance. Constructed from premium materials including ASTM A536 ductile iron body and AISI 304 stainless steel components, it's engineered for durability and low maintenance.
With an adjustable standpipe accommodating varying burial depths (0–110") and a 1" square stem drive, installation and field adjustment are straightforward — simply trim the standpipe to match your ground line and set the targets to suit your valve size.
Key Features:
- FM Approved
- AWWA C550 fusion-bonded epoxy coating
- Adjustable burial depth: 0–110"
- Lexan UV-stabilized window glass
- EPDM gasket sealing
- Stainless steel operating nut (AISI 304/ASTM B62)
Ideal for municipal, industrial, and commercial fire suppression installations.
