Conventional Fire Alarm Panel – Model FGCP
The FGCP Series is a microprocessor-controlled conventional fire detection control panel available in 2, 4, 8, 12, and 16 zone configurations, certified to EN 54-2 and EN 54-4. On detecting an alarm condition, the panel provides both audible and visual warnings while displaying system status on its LCD. Up to 20 detectors and an unlimited number of manual call points can be connected per zone, with unauthorised access prevented via password or key switch.
Key Features:
- 2 / 4 / 8 / 12 / 16 zone configurations
- 2×16 alphanumerical LCD display
- 7 LED indicators: Alarm, Mains, Battery, Fault, Sounder Fault, System Fault, Disabled
- Up to 20 detectors and unlimited manual call points per zone
- Two relay outputs / two sounder outputs
- Sounder delay option to prevent false/fault alarms
- Start/Stop Sounder, Reset, Silence Buzzer controls
- Disable function for zone and sounder
- Password or key switch access control
- EN 54-2 and EN 54-4 certified
Key Specs:
- AC Input: 220V ±10%/-15% | Power Consumption: <53W
- 24V Output: 28.5V DC max / 21V DC min, 100mA max
- Battery: 2 x 12VDC 7Ah | Charge Voltage: 27.2V ±2%
- Zone Circuit Output Voltage: Max 25.17V / Nominal 24.65V / Min 18.96V
- End-of-Line Resistance: 4.7 kΩ | Max Resistance per Zone: 50Ω
- Operating Temperature: -10°C to +50°C | Storage: -20°C to +70°C
- IP Rating: IP30
- Body: Plastic (P) / Metal (M) | Colour: Gray / Red / Black
Model Range:
| Model | Description |
|---|---|
| FGCP02 | 2-zone Conventional Fire Panel — Metal Housing |
| FGCP04 | 4-zone Conventional Fire Panel — Metal Housing |
| FGCP08 | 8-zone Conventional Fire Panel — Metal Housing |
| FGCP12 | 12-zone Conventional Fire Panel — Metal Housing |
| FGCP16 | 16-zone Conventional Fire Panel — Metal Housing |
Dimensions & Weight:
| Housing | Dimensions | Weight |
|---|---|---|
| Plastic (FGCP/XXP) | 303 × 307 × 115 mm | 990 g |
| Metal (FGCP/XXM) | 274 × 324 × 68 mm | 2,400 g |
Approvals: Applus certified, EN 54-2 / EN 54-4, CE marked
Detector Isolator Base – IQ331BI
The IQ331BI isolator base protects the bus in the event of a short-circuit fault. When a fault occurs, the isolator base nearest the short-circuit acts quickly to cut off the affected section, allowing other devices on the bus to continue operating normally. Once the fault is cleared, the isolated section automatically reconnects. The isolator base requires no coding and does not occupy an address in the loop.
Key Features:
- Fast activation response
- LED indicates isolation condition
- Protection against overload conditions
- Minimizes disruption from short circuits
- Stable communication with high noise immunity
- Up to 20 detectors can be installed between isolating bases
- Suitable for smoke, heat, and multi-sensor detectors
- Automatic restoration once short circuit is cleared
- Should be used with Loop Stabilizer
- Applus certified
Key Specs:
- Operating Voltage: 20–28V
- Static Current: <85µA | Isolation Current: <9mA
- Isolation Voltage: Less than 14V
- Indicator: Yellow — on during isolation, off during monitoring
- Operating Temperature: -10°C to +55°C
- Relative Humidity: ≤95%, non-condensing
- Terminal Wiring Capacity: 0.2mm²–2.5mm²
- External Dimensions: Ø100 x 31.4mm
Note: The description text refers to the product as "IQ311BI," but the document title and spec table both use "IQ331BI" — I've used IQ331BI throughout to match the filename and header, but worth confirming the correct model number with your source.
Dividing Breeching – 2-Way Lever Controlled
The instantaneous dividing breeching offers a simple solution for splitting a single water supply into two, with a lever-controlled valve on each outlet for easy flow control. With one male inlet and two female outlets, a standpipe or hose can create two independent hose lines with a secure fit — doubling firefighting power. Constructed from durable light alloy with inlets and outlets manufactured to BS336, it's suitable for 2.5-inch (64mm) diameter hosing. Beyond firefighting, it's also used for general industrial applications, agriculture and irrigation, and wash-down use, with a maximum working pressure of 16 bar.
Key Features:
- Manufactured to BS336
- Inlet: 1 x 2½" Male Instantaneous (BS336)
- Outlet: 2 x 2½" Female Instantaneous (BS336)
- Suited to 2.5" (64mm) diameter lay flat hosing
- Constructed of light alloy
- Working Pressure: 16 bar
Key Specs:
- Product Code: VP-FDB65
- Dimensions: 160 x 300 x 400mm
- Weight: 4.64kg
- Material: Light alloy
- Compliance: BS336
- Carton Quantity: 1
EYEWASH WALL MOUNTED
Each spray head has an internal flow control and filter to remove impurities. Operated by a push plate, stay-open ball valve. The eyewash is self-chaining. Delivered with collecting bowl in powder-coated stainless steel, brass valve and wall bracket in aluminium. The water supply should be designed for a minimal flow of 14 I/min at a pressure of 2,4 bar. Mount the unit approx. 1100 mm from the floor and up to the top of the eye wash spray head.
EYEWASH WITH BOWL, FREEZE RESISTANT
Krusman eye/face wash for outdoor use with galvanised steel pipes and a green/white stripe. Self-draining eye/facewash with built-in flow control and filter for each individual spray head. Stay-open ball valve, operated by a pull handle. Designed for a minimum flow of 28 l/min at 2.4bar pressure. Freeze-resistant and manufactured for Ex-classified environments. The model is available for ex-classified or non-ex-classified environments. Emergency signs are enclosed with each eyewash.
EYEWASH, FLOOR MOUNTED
Each spray head has an internal flow control and filter to remove impurities. Operated by a push plate, stay-open ball valve. The eye/facewash is self-draining. Delivered with collecting bowl in powder-coated stainless steel, pipes in galvanised steel with green/ white stripes, and a brass valve. The water supply should be designed for a minimal flow of 14 1/min at a pressure of 2,4 bar.
FGT50 Bronze Gate Valve — Fire Protection Service (OS&Y, Rising Stem)
UL Listed fire protection service bronze gate valve designed for the isolation of clean water and other non-corrosive fluids in building services, water treatment, and fire protection systems. The FGT50 features an outside screw and yoke (OS&Y) design with a non-rising stem to minimise installation height, combined with a compact structure and reliable sealing for dependable service.
Key Specs:
- Working Pressure: 175 PSI (CWP)
- Seat Test Pressure: 350 PSI or 80 PSI Air
- Shell Test Pressure: 350 PSI or 80 PSI Air
- Connection Standard: ANSI B1.20.1 NPT / BS21 BSPT
- Medium: Water
- Sizes: ¾", 1", 1¼", 1½", 2"
- Approval: UL Listed
Materials:
| Part | Material |
|---|---|
| Body | Bronze ASTM C83600 |
| Bonnet | Bronze ASTM C83600 |
| Stem | Brass |
| Disc | Bronze ASTM C83600 |
| Disc Pin | SS-304 |
| Handwheel | Cast Iron |
| Gland Packing | Graphite |
Key Features: Compact structure, reliable sealing, threaded bonnet, non-rising stem, and low pressure drop.
FIRE HOSE - DURA-LINE TYPE 3
The Fireguard Dura Line fire hose features a ribbed cover for excellent abrasion resistance and a smooth liner to minimize friction loss. Constructed with a nitrile rubber cover, polyester reinforcement, and a nitrile rubber liner, it's resistant to weather, UV, oxidation, and most chemicals or petroleum products — making it suitable for demanding firefighting and industrial environments. UL Listed, maintenance-free, and requiring no drying, the hose is flexible to deploy and rolls into a compact coil for storage.
Key Features:
- Ribbed cover, smooth liner construction
- Resistant to weather, UV, oxidation, chemicals, and petroleum products
- Temperature range: -4°F to 158°F (-20°C to 70°C)
- Maintenance-free, no drying required
- Compatible with Brass/Alu NST/NPSH threaded couplings (other types on request)
- Standard lengths: 50', 100', 200', up to 660'
- Customizable color, couplings, and marking
- BS336 coupling available in brass and aluminium
- UL Listed
Applications: Fire brigades, refineries, chemical & petrochemical complexes, airports & military bases, oil rigs & power stations (coal, oil, nuclear), building protection, harbors & marine.
Technical Data:
| Nominal Size | Working Pressure (psi/bar) | Test Pressure (psi/bar) | Burst Pressure (Lbs./ft. / Kg/m) | Wall Thickness (in/mm) |
|---|---|---|---|---|
| 1" (25mm) | 300–400 / 21–28 | 900–1200 / 63–84 | 0.18 / 0.28 | 0.079 / 2.4 |
| 1-1/2" (38mm) | 250–300 / 17–21 | 750–900 / 51–63 | 0.21 / 0.31 | 0.085 / 2.6 |
| 1-3/4" (45mm) | 250–300 / 17–21 | 750–900 / 51–63 | 0.24 / 0.36 | 0.114 / 2.9 |
| 2" (52mm) | 250–300 / 17–21 | 750–900 / 51–63 | 0.30 / 0.45 | 0.118 / 3.0 |
| 2-1/2" (65mm) | 250–300 / 17–21 | 750–900 / 51–63 | 0.39 / 0.58 | 0.118 / 3.0 |
| 3" (75mm) | 250–300 / 17–21 | 750–900 / 51–63 | 0.58 / 0.87 | 0.118 / 3.0 |
Gas Weight Monitoring System Analog type with Normal Indication (Standalone)
Online Monitor is used in Gas based fire extinguisher system like Co2 to provide alert indication to check refill as per bureau of Indian standards requirement. Normal condition will be indicated by green LED (Flashing). Alert will be indicated by yellow LED. IH007-ST online monitor analog type is stand alone model this is specially designed to use monitor one cylinder only. Input will be 24V DC and Output will be potential free ‘NO’ contact.
Gas weight Monitoring System Mechanical Indicator Type
Online Monitor is used in gas based fire extinguishing system like Co2 gas to provide alert indication to check refill is required to meet NPFA/BSI requirement. Movement of indicator in downward refill status. Please note that this device is not a weighing unit. This only provide alert indication to check the cylinder and do refill as per requirement.
Gas Weight Monitoring System Mechanical Indicator Type With Explosion Proof Limit Switch
Online Monitor is used in Co2 Gas based fire extinguisher system to provide refill alert indication in case of loss of agent as per design standards. Movement of indicator in downward position indicates alerts status. Ex. Proof limit switch can be additionally used to provide further signal at control panel.
GRP Extinguisher Stand
The GRP Fire Extinguisher Stand provides a durable, freestanding floor stand for a single fire extinguisher, keeping it visible, accessible, and off the ground for easy identification in an emergency. Fabricated from GRP (glass reinforced plastic) with a polished finish, the stand is available in red or yellow (by order) to suit site colour schemes and signage requirements.
Key Specs:
- Product Size: 760 x 320 x 300mm
- Product Weight: >0.95kg
- Surface Finish: Polished
- Color: Red / Yellow (by order)
- Loading Rate: 20kg
- Product Packaging: 112 x 37 x 44cm
- Packaging Info: 112 x 37 x 44cm / 8pc, 7.5kg / 8.3kg
Note: As a GRP product, care should be taken to avoid surface damage — if glass fibre threads penetrate the skin, seek medical attention immediately.
