PORTABLE EYEWASH 60 LITER
Self-contained portable eyewash unit that uses gravity to deliver water through dual spray heads. Unit delivers over 53 liters of water for 15 minutes. The plastic tank can be installed in a wide variety of locations where potable water is not available. It must be filled up with clean potable water and sterilising fluid must be added. Unit shall be inspected regularly and the water must be changed at least every sixth months.
PORTABLE EYEWASH, 34 LITER
Self-contained portable eyewash unit that uses gravity to deliver water through dual spray heads. Unit delivers over 34 liters of water for 15 minutes. The plastic tank can be installed in a wide variety of locations where potable water is not available. It must be filled up with clean potable water and sterilising fluid must be added. Unit shall be inspected regularly and the water must be changed at least every sixth months.
Repeater Panel – FG3000
he FG3000 is a remote indication and control panel that communicates with the IQ304/IQ308 Fire Alarm Control Panel (FACP) via CAN or Ethernet network. Fully functional with the same display as the FACP, it supports evacuation, silence/resound, and reset functions from a remote location.
Key Features:
- 7.0" color touch-sensitive LCD, 800×480 resolution
- 1 fire alarm relay and 1 fault relay output, with USB upgrade support
- Supports up to 60 total nodes (Repeater + FACP) on the network
- Configuration data import/export via direct PC connection (Type-C interface)
- Stores up to 10,000 records each for fire alarm, fault, C&E, and operation events
Key Specs:
- Quiescent Voltage: 18–30V DC | Quiescent Current (full loaded): <0.1A
- FIRE OUT: 18–28V DC, 50mA max, 10KΩ end-of-line resistor
- Fault Out (NC, COM, NO): 2A @24VDC
- CAN: 20–28VDC, 1A max output current, 10KΩ end-of-line resistor
Controls: Fire, Disable, Power, Delay, Fault, Sounder Disabled/Fault, System Fault, S.C. Disabled/Fault, Power Fault, Sounder Silence, Evacuate, Test, Reserve, Login — plus Silence, Authorize, Evacuate, Reset, Mute, Left/Right navigation, and Confirm buttons, matching the FACP interface.
Resilient Seated Flanged Ends Swing Check Valve FCF01
A resilient seated flanged swing check valve conforming to AWWA C508 with a clear waterway design and fusion bonded epoxy coating compliant with AWWA C550. The FCF01 is suitable for fire protection and water supply applications, preventing backflow with a robust ductile iron body and bronze seat construction.
Available in sizes from 50mm (2") to 300mm (12"), the FCF01 accommodates a wide range of flanged end standards including ANSI, EN, and BS, making it highly versatile for international projects and installations.
Key Specs:
- Valve Standard: AWWA C508 | Coating: AWWA C550
- Working Pressure: 200 / 250 / 300 PSI
- Working Temperature: -10°C to 110°C
- Sizes: 50mm to 300mm (2" to 12")
- Flanged Ends: ANSI B16.1 Class 125 / B16.42 Class 150 / B16, EN1092-2 PN10/PN16/PN25, BS10 Table D/Table E
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (ASTM A536 65-45-12) |
| Cover | Ductile Iron (ASTM A536 65-45-12) |
| Clapper | Carbon Steel + SS304 + EPDM |
| Clapper Arm | Ductile Iron (ASTM A536 65-45-12) |
| Hinge Pin | Stainless Steel (AISI 304) |
| Seat | Bronze (ASTM C84400) |
Specifications subject to change without prior notice due to product optimisation.
Resilient Seated NRS Type Flanged-Ends FGFN939-300
FM Approved resilient seated non-rising stem (NRS) gate valve with mechanical joint ends, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. The compact NRS design is ideal for underground or below-ground installations where a rising stem would be impractical, while delivering the same reliable resilient seated shut-off as the OS&Y range.
Key Specs:
- Working Pressure: 300 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C153 / A21.11
- Sizes: 80mm to 300mm (3" to 12")
- Approval: FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge Disc | Ductile Iron, EPDM Coated |
| Stem | Stainless Steel (AISI 304/420) |
| Disc Nut | Bronze (ASTM B62) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Thrust Collar | Bronze (ASTM C51100) |
| Gasket | EPDM |
| Gland | Ductile Iron (A536 65-45-12) |
Non-rising stem (NRS) design with mechanical joint (MJ-MJ) ends — suited to buried or space-constrained installations.
Resilient Seated NRS Type-Flanged-MJ Ends FGFM939-300
FM Approved resilient seated non-rising stem (NRS) gate valve with flanged x mechanical joint end configuration, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. The combination flanged-MJ design offers flexibility for transitioning between flanged and mechanical joint pipework within the same installation, while the compact NRS profile suits buried or space-constrained applications.
Key Specs:
- Working Pressure: 200 / 250 / 300 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C153/A21.11, ANSI B16.1 Class 125 / B16.42 Class 150, EN1092-2 PN16
- Sizes: 80mm to 300mm (3" to 12")
- Approval: FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge Disc | Ductile Iron, EPDM Coated |
| Stem | Stainless Steel (AISI 304/420) |
| Disc Nut | Bronze (ASTM B62) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Thrust Collar | Bronze (ASTM C51100) |
| Gasket | EPDM |
| Gland | Ductile Iron (A536 65-45-12) |
Flanged x MJ end configuration with non-rising stem design — supports flexible connection between flanged and mechanical joint pipework. Compatible with ANSI and EN flange standards.
Resilient Seated OS&Y Type-Flanged-Groove Ends FGO138-365
FM Approved resilient seated outside screw and yoke (OS&Y) gate valve with a flanged x grooved end configuration, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. The combination flanged-groove design offers flexibility for connecting between flanged and grooved pipework systems within the same installation, while the OS&Y design provides clear visual indication of valve position.
Key Specs:
- Working Pressure: 365 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: ANSI 125/150 / EN 1092-2 PN16, AWWA C606 / GB/T8260 / VDS 2100
- Sizes: 50mm to 300mm (2" to 12")
- Approval: FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge Disc | Ductile Iron, EPDM Coated |
| Stem | Stainless Steel (AISI 304) |
| Disc Nut | Bronze (ASTM B62) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Thrust Collar | Bronze (ASTM C51100) |
| Gasket | EPDM |
| Gland | Ductile Iron (A536 65-45-12) |
Flanged x grooved end configuration with rising stem (OS&Y) design — ideal where flexible connection between flanged and grooved pipework is required.
Resilient Seated OS&Y Type-Flanged-MJ Ends FGM939-300
FM Approved resilient seated outside screw and yoke (OS&Y) gate valve with flanged x mechanical joint end configuration, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. The combination flanged-MJ design provides connection flexibility between flanged and mechanical joint pipework, while the OS&Y rising stem offers clear visual valve position indication for supervised fire protection applications.
Key Specs:
- Working Pressure: 300 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C153/A21.11, ANSI B16.1 Class 125 / B16.42 Class 150, EN1092-2 PN16
- Sizes: 80mm to 300mm (3" to 12")
- Approval: FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge | Ductile Iron, EPDM Coated |
| Wedge Nut | Stainless Steel (AISI 304) |
| Stem | Stainless Steel (AISI 304/420) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Gasket | EPDM |
| Packing | PTFE (Non-asbestos) |
| Stem Nut | Bronze (ASTM B62) |
| Handwheel | Ductile Iron (A536 65-45-12) |
Flanged x MJ end configuration with rising OS&Y stem — suits installations requiring transition between flanged and mechanical joint pipework with supervisory position indication. Compatible with ANSI and EN flange standards.
Resilient Seated OS&Y Type-Groove-Groove Ends FGO135-365
UL Listed and FM Approved resilient seated outside screw and yoke (OS&Y) gate valve with groove x groove end connections, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. Designed for fully grooved pipework systems, the FGO135-365 offers the same proven OS&Y rising stem design with clear visual valve position indication across a wide size range from 50mm (2") to 300mm (12").
Key Specs:
- Working Pressure: 365 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C606 / VDS2100 / AS2638.2
- Sizes: 50mm to 300mm (2" to 12")
- Approvals: UL Listed & FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge Disc | Ductile Iron, EPDM Coated |
| Stem | Stainless Steel (AISI 304) |
| Disc Nut | Bronze (ASTM B62) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Thrust Collar | Bronze (ASTM C51100) |
| Gasket | EPDM |
| Gland | Ductile Iron (A536 65-45-12) |
Resilient Seated OS&Y Type-MJ-MJ Ends FGM939-365
UL Listed and FM Approved resilient seated outside screw and yoke (OS&Y) gate valve with mechanical joint ends, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. Designed for fire protection and water supply applications, the FGM939-365 delivers reliable isolation across a wide range of pipe sizes from 80mm (3") to 300mm (12").
Key Specs:
- Working Pressure: 365 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C606 / ANSI/AWWA C111/A21.11-00
- Sizes: 80mm to 300mm (3" to 12")
- Approvals: UL Listed & FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge Disc | Ductile Iron, EPDM Coated |
| Stem | Stainless Steel (AISI 304) |
| Disc Nut | Bronze (ASTM B62) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Thrust Collar | Bronze (ASTM C51100) |
| Gasket | EPDM |
| Gland | Ductile Iron (A536 65-45-12) |
Resilient Seated OS&Y Type-MJ-MJ Ends FGMJ939-300
FM Approved resilient seated outside screw and yoke (OS&Y) gate valve with mechanical joint x mechanical joint end connections, conforming to AWWA C515 and BS5163 with fusion bonded epoxy coating compliant with AWWA C550. The OS&Y rising stem design provides clear visual confirmation of valve position, making it suitable for supervised fire protection installations with mechanical joint pipework.
Key Specs:
- Working Pressure: 300 PSI
- Working Temperature: -10°C to 120°C
- Valve Standard: AWWA C515 / BS5163 | Coating: AWWA C550
- Connection Ends: AWWA C153 / A21.11
- Sizes: 80mm to 300mm (3" to 12")
- Approval: FM Approved
Materials:
| Part | Material |
|---|---|
| Body | Ductile Iron (A536 65-45-12) |
| Wedge | Ductile Iron, EPDM Coated |
| Wedge Nut | Stainless Steel (AISI 304) |
| Stem | Stainless Steel (AISI 304/420) |
| Bonnet | Ductile Iron (A536 65-45-12) |
| Gasket | EPDM |
| Packing | PTFE (Non-asbestos) |
| Stem Nut | Bronze (ASTM B62) |
| Handwheel | Ductile Iron (A536 65-45-12) |
MJ x MJ end configuration with rising OS&Y stem — suited for above-ground mechanical joint fire protection pipework requiring visual position indication.
