All products - Page 10 of 17 - Fire Guard Global

DISTRIBUTED CONTROLLER

0 out of 5

It is responsible for information transfer within a certain area, thus increasing the number of subordinate devices and facilitating data.

Specification

Model: FG-INT01
Voltage AC120V/0.035A or AC277/0.016A 50/60Hz
AC Power 3W Battery Ni-MH - AA 600MAH/4.8V
Emergency 3Hours Duration
Communication CAN BUS BUS AND 485 BUS

The Fireguard FGH701 and FGH702 are UL Listed and FM Approved dry barrel fire hydrants engineered to meet or exceed ANSI/AWWA C502, UL246, and FM1510 standard requirements. Built on over 100 years of dry barrel hydrant heritage, they deliver the critical reliability demanded of emergency firefighting infrastructure — with a 10-year guarantee to back it up.

Breakaway Safety & Freeze Protection In the event of a vehicle impact, the breakaway flange ensures only the upper section separates, maintaining the seal with no water leakage and allowing rapid repair without interrupting the water supply. The dry barrel design keeps the hydrant barrel water-free when not in use, eliminating freeze damage in cold climates.

Advanced Engineering for Long-Term Performance A sealed oil reservoir with O-ring seals automatically lubricates stem threads and bearing surfaces every time the hydrant is operated — eliminating manual lubrication requirements and ensuring smooth, low-torque operation throughout the hydrant's service life. The bronze seat ring, bronze drain screw plug, and EPDM-encapsulated ductile iron wedge combine corrosion resistance with reliable long-term sealing. A gland nut prevents unauthorised removal of the operating nut, and the sealed bonnet prevents water ingress that could cause freezing.

Easy Maintenance Supplied complete with repair kits covering main valve components, safety flange, bonnet, and extension parts. All repairs can be carried out above ground without excavation or shutting off the water supply. Barrel length extension kits are available on request to suit varying bury depths.

Key Specifications

Working Pressure: 250 psi (1,723 kPa)
Test Pressure: 500 psi (3,447 kPa)
Body: Ductile iron (ASTM A536 65-45-12)
Wedge: Ductile iron fully encapsulated with EPDM rubber
Stem: Stainless steel (SS304)
Outlet Thread: NFPA 1963 (hose nozzle 2.5" 7.5 NH; pumper nozzle 4.5"/4" NH)
Closing Direction: Clockwise (counter-clockwise available on request)
Default colour: Red

Model Range

Model	Base Valve	Hose Outlet	Pumper Outlet	Inlet Type
FGH701	6"	2.5"	4½"	Flanged
FGH702	6"	2.5"	4½"	Mechanical joint
FGH701-4.5/2.5	5¼"	2.5"	4½"	Flanged
FGH701-4/2.5	5¼"	2.5"	4"	Flanged

Inlet Options Flanged (ANSI 125 lb faced and drilled), mechanical joint (ANSI/AWWA C111 compliant), or adapter flange for variable pipe sizes. Optional 4" flange inlet available for 4" pipe systems.

Certifications: UL Listed (UL246) | FM Approved (FM1510) | ANSI/AWWA C502 Compliant | NFPA 1963

Dry Hydrant, Fire Hydrant

DRY BARREL PILLAR HYDRANT

0 out of 5

The Fireguard FGDH series are LPCB-approved dry barrel pillar hydrants designed and manufactured to BS EN 14384:2005, BS 1074-1, BS 1074-2, and BS 1074-6 standards. Built for non-potable firefighting water systems, they combine a robust dry barrel design with innovative safety features to deliver long-term, freeze-resistant performance in demanding outdoor environments.

Breakaway Safety Design In the event of a vehicle impact, only the upper flange section breaks — the seal is maintained and there is no leakage of water. This critical safety feature prevents a collision from causing a flood or loss of firefighting water supply, and allows the hydrant to remain functional or be quickly restored to service.

Freeze & Corrosion Protection The dry barrel design keeps the upper section water-free when not in use. An automatic drain system evacuates retained water (≤150ml) from the upper barrel within 10 minutes of the main valve closing — preventing freeze damage in cold climates. Above-ground sections are sand-blasted and finished with red electrostatic powder coating (≥300µm), while below-ground sections receive a double coat of black bituminous paint for corrosion protection.

Flexible Configuration Available in DN100 and DN150 inlet sizes with flanged connections to customer requirements. Stem options include carbon steel or stainless steel (STS304/316/316L) for enhanced corrosion resistance. Supplied in standard configuration, with straight-through landing valve, or with BS366 couplings.

Key Specifications

	FGDH100	FGDH150
Standard	BS EN 14384	BS EN 14384
Working Pressure	16 bar	16 bar
Inlet	DN100 flanged	DN150 flanged
Outlet	Two BS363 + one 4" BSP	Two BS363 + one 4" BSP
Shell Material	Ductile iron	Ductile iron
Closing Direction	Clockwise	Clockwise
Opening Turns	11	11
Time for Draining	≤10 min	≤10 min
Retained Water	≤150 ml	≤150 ml
MOT	≤125 NM	≤125 NM
MST	≥250 NM	≥250 NM

Certifications: LPCB Approved | BS EN 14384:2005 | BS 1074-1/2/6 Compliant

Fire Hydrant, Wet Hydrant

WET BARREL HYDRANT

0 out of 5

A reliable, low-maintenance wet barrel fire hydrant engineered for freeze-free environments. Featuring pressurized water at all outlets, this UL-listed hydrant is rated for 250 psi working pressure and meets AWWA C503 standards. Ideal for regions where water freezing is not a concern.

Technical Specifications

Feature	Specification
Body Material	Ductile Iron ASTM A536
Working Pressure	250 psi
Inlet Connection	Flanged
Outlet Connections	4.5" - 4 NH hose connection thread2.5 NH
Design Standards	ANSI/AWWA C503
Operating Temperature	-10°C to 80°C
Certifications	UL Listed, FM Approved

Key Features

Pressurized water constantly available at every outlet
Trouble-free operation with easy maintenance
Durable ductile iron construction
Compliant with AWWA C503 standards
Suitable for warm climate installations

All Categories, IQ600 Series Addressable Fire Alarm System – UL Approved

Dual Module IQ611DM

0 out of 5

The IQ611MR is an intelligent addressable relay module designed to extend the control capabilities of fire alarm systems. Providing two simultaneously activated relay output sets, it takes a single address on the Signaling Line Circuit (SLC) or Data Communication Link (DCL) of the fire alarm control panel — enabling precise, programmable control of auxiliary devices such as door holders, fans, lifts, and other building systems.

Clear Status Indication A red LED provides continuous visual feedback on the module's status. During normal operation it blinks every 4 seconds; when an event is activated, the LED blinks at an extended rate to indicate the active condition, returning to normal once the event clears.

Flexible Installation Compatible with both Class A/DCLA and Class B/DCLB circuit configurations, the IQ611MR mounts directly onto a standard 2×4 or 4×4 electrical box using the IQ611B surface wall box. Wiring is straightforward with 12–18 AWG wire.

Key Specifications

Nominal Voltage: 24 VDC (Range: 15–28 VDC)
Standby Current: 0.15 mA | Active Current: 0.26 mA
Contact Rating: 30 VDC, 2A
Operating Temperature: 0°C to 50°C (32°F to 122°F)
Operating Humidity: 0–93% RH
Dimensions: 120 × 120 × 45 mm | Weight: 255g
Wiring: 12–18 AWG

Certifications: UL Listed (UL864) | FM Approved

Accessories, Fire Pumps

ELECTRIC MOTORS

0 out of 5

Marathon electric motors are setup in FIREGUARD fire pump solution. Marathon Motors has been leader in providing high quality motors with wide range of UL listed Fire pump drip-proof totally enclosed fan cooled TEFC / ODP. The features of Marathon fire pump motor included horse power range of 3 to 450 HP,2 and 4 pole capabilities ,Cast iron construction, ball bearings ,red painted and 60/50 hz ratings, NEMA design B, Code G or less, EPAct efficiency. Marathon Fire pump motors meet NFPA 20 standards and are fully compliant with federal motor efficiency requirements as described in the energy independence and security act of 2007 also known as EISA FIREGUARD also provides customization service to our customers. Customers can specify different motor brands on their own. Optional Brand Motors: WEG, Techtop

Conventional Fire Alarm System

ELECTRONIC SOUNDER AND BEACON

0 out of 5

The FG-03127 series are LPCB-certified electronic sounders designed for fire alarm, security, and industrial signalling applications. Delivering up to 114 dB(A) of sound output at ultra-low current consumption, they provide powerful, reliable audible alerting in a compact, durable ABS housing. The FG-03127-BS adds a high-efficiency visual beacon for locations requiring combined audio-visual notification.

Flexible & Easy to Configure 32 selectable signalling tones via DIP switch allow the device to be configured precisely for the application. A built-in volume control offers up to -20 dB of adjustment as standard. Dual 12/24V DC operation in a single unit means no manual adjustment is needed when used across different system voltages — simplifying stock management and installation.

Straightforward Installation Two sets of IN and OUT terminals facilitate simple loop wiring, and the compact form factor suits a wide range of mounting locations. The high-efficiency lens on the FG-03127-BS maximises visual output for enhanced coverage.

Key Specifications