PRESSURE REDUCING ANGLE VALVE
The FGPRV115/125 is a 300lb rated pressure restricting angle valve, forged from brass, with adjustable restriction of residual pressure up to 300 lb. A locking pin device restricts full opening of the valve by untrained personnel, while allowing firefighters to remove the pin for full valve opening when needed. FM Approved, and available in Female x Male or Double Female configurations.
Female x Male Configuration:
- Standard equipment: Female NPT inlet x male hose thread outlet, forged brass valve body, red hand wheel
Double Female Configuration:
- Standard equipment: Female NPT inlet and outlet, forged brass valve body, red hand wheel
Optional Finishes (both configurations):
- Polished Brass (PB)
- Rough Chrome Plated (RC)
- Polished Chrome Plated (PC)
Materials:
| Part | Material | Part | Material |
|---|---|---|---|
| Body | ASTM B283 C37700 | Lock Nut | ASTM B283 C37700 |
| Nut | ASTM B283 C37700 | Handle Wheel | ZL102 |
| Washer | 304 | Wheel Washer | 304 |
| Seat Seal | EPDM (A70) | Wheel Nut | ASTM B283 C37700 |
| Holder | ASTM B283 C37700 | Collar | ASTM B283 C37700 |
| Set Screw | 304 | Washer | PA6 |
| Lock Nut | ASTM B283 C37700 | Set Screw | 304 |
| Bonnet | ASTM B283 C37700 | Set Numbers | ASTM B283 C37700 |
| Stem | ASTM B283 C37700 | Wire | 304 |
| O-Ring | EPDM (A70) |
Dimensions (mm) – Female x Male:
| Size | A | B | C | D | E |
|---|---|---|---|---|---|
| 1½” x 1½” | 100 | 48 | 58 | 123 | 145 |
| 2½” x 2½” | 127 | 67 | 77 | 165 | 206 |
Dimensions (mm) – Double Female:
| Size | A | B | C | D | E |
|---|---|---|---|---|---|
| 1½” x 1½” | 100 | 48 | 62 | 123 | 145 |
| 2½” x 2½” | 127 | 67 | 83 | 165 | 206 |
Documents and Resources
- Size Guide
- Reviews (0)
| size | chest(in.) | waist(in.) | hips(in.) |
|---|---|---|---|
| XS | 34-36 | 27-29 | 34.5-36.5 |
| S | 36-38 | 29-31 | 36.5-38.5 |
| M | 38-40 | 31-33 | 38.5-40.5 |
| L | 40-42 | 33-36 | 40.5-43.5 |
| XL | 42-45 | 36-40 | 43.5-47.5 |
| XXL | 45-48 | 40-44 | 47.5-51.5 |
Reviews
There are no reviews yet.